My SafeTag Mini 2nd Gen says "Awaiting Calibration"

Created by Callum Mackeonis, Modified on Fri, 20 Dec, 2024 at 3:18 PM by Jessica Caldwell

Please check you have a Mini Second Gen before proceeding. This Mini has a rubber flap covering the sim, charging port, and a power switch. If you have a Mini First Gen, please refer to the relevant article. The SafeTag Mini 2nd Gen looks like this:   This means your tracker has connected to our system correctly, however it hasn't been unable to calibrate a location yet.


If you haven't been for the calibration journey yet (a 5-15 minute drive), as described in your activation guide, please complete this first, as this step is required to calibrate the device location. 


If you have been for the calibration journey and the tracker is still awaiting calibration, please follow these steps.


This will be happening as your tracker has been unable to establish a GPS lock.

 

To explain what's going on here, GPS trackers require two types of signal to function:

1. GPS signal - which they use to calculate their location with GPS satellites.

2. Data Signal - (4G/3G/2G) just like a mobile phone to access the internet and send its location to your SafeTag account.


To fix it, there’s a few factors we can try and eliminate:

 

1. If your tracker is placed deep in the vehicle with obstructions above this would likely be the cause. Could you please try moving it to another place? This will likely give better performance as GPS signal is weaker than data signal (4G/3G/2G), and so it can be blocked more easily by things like; large bodies of water, buildings, signal interference from other devices, being placed in a vehicle with obstructions above.

 

2. GPS signal, unlike the data signal, only comes from above, so make sure to place the tracker with the logo facing upwards with the best line of sight to the sky as possible, this will ensure the best performance.

 

3. Please place the tracker on charge for at least 4 hours.

 

Once you’ve given those steps a go, could you please test it for 48 hours to elapse in the new position?

 

If all above steps fail, please don't worry! Get in touch with us and we can get your tracker up and running.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article